Golo Airsoft brings to life again the VFC G45 that they customised previously but was destroyed in a fire. This time, they have customized it again, making it a CO2 specification. They have shared some useful information, so it would be beneficial to take a look if time permits.

The setup details are as follows:

The Hammer sp is Sotec 0.9mm, the hammer unit interference part has been polished, the hammer interference part has been polished, the hammer roller has been processed, a brass spacer has been embedded, and steel has been embedded to prevent the front rail from floating up.

The breach corner has been cut and polished, the cylinder gas inlet has been expanded, the nozzle restriction is 1.8mm, the flow valve has been processed, the extractor has been ground, and the outer recoil sp has been cut by 1.5 rolls.

They are unsure if that's all they did, as they have already forgotten some of the modifications.