Mancraft PDiK V2 Gen. 3 For EMG Noveske 13.7" Gen 4 Infidel


ASG Olsztyn reviews the Mancraft PDiK V2 Gen. 3 HPA engine installed on the EMG Noveske 13.7" Gen 4 Infidel. This should be shipping now as it had a schedule release of December 2022. This HPA engine has no electronics which of course requires no batteries and fires in semi-auto mode only. It can be purchased as the engine itself or with the Mancraft gearbox shell.

G&G TR16 MBR 308WH With Mancraft PDiK Test


The Woodland Raiders test the G&G TR16 MBR 308WH HPA rifle thatt comes equipped with the following: Pdik v2 gen3 engine (8mm volumetric reduction), G&G stock nozzl, -Specna Arms Maxx Model Hop-Up Chamber, MadBull Steel Bull 6.03mm 509mm internal barrel, Maple Leaf 70 blue Silicone rubber, Maple Leaf Omega Nub Tensioner.

Mancraft To Release A Whole Bunch Of CNC Receivers In November 2022


Depending on the AR-style airsoft gun you prefer to use, whether for SR-25, M4, AR-15, or Speedsoft, Mancraft got a bunch of CNC machined receivers for you to choose from. These receivers are made out of 7075 T6 aluminium alloy, which is the same alloy used in aerospace, aircraft which Mancraft says have an ultimate tensile strenght of 570MPa.

If you want them they are now taking pre-orders.

PolarStar Jack Vs Mancraft PDiK


A battle of HPA engines. Woodland Raiders for a comparison of the PolarStar Airsoft Jack and the Mancraft PDiK... "Comparison of the operation of the newly purchased HP replica with the Polar Star Jack engine and the Mancraft Pdik gen3 air motor.

In the video you can see that the engine operating on the principle of a solenoid valve gives better repeatability when shooting than the Mancraft pneumatic device.

Mancraft CNC M4 Speedsoft Body


Now on preorder with a September 2022 release target is the Mancraft CNC M4 Speedsoft Body... "Made out of 7075 T6 aluminium alloy (the same as used in aerospace, aircraft) with ultimate tensile strenght of 570MPa. Our M4/AR15 style, speedsoft body is made at precision CNC machines with highest standards to fit & work perfectly. After machining - sandblasted & anodized."


Mancraft CNC SR25 Body On Pre-Order


Mancraft are now taking pre-orders for the CNC'd SR-25 AEG body that they expect to release in September... "FIRST on the market, CNC SR-5 Body! Made out of 7075 T6 aluminium alloy (the same as used in aerospace, aircraft) with ultimate tensile strenght of 570MPa.

Mancraft Mjolnir Amplifier Review


Sometimes it's nice to go loud as you pull the trigger of your airsoft gun. To get more maximum effect, you'll need am amplifier. ASG Olsztyn got to check the new Mjolnir Amplifier from Mancraft.Available in different colours, the Mjolnir Amplifier uses the 14mm CCW thread and allows you to adjust the sound by changing the internal tube's position.

New Mancraft MASS Gen.2 & PDiK Gen.3 SA


HPA airsoft players can check out the new products coming out of the Polish HPA airsoft engine manufacturer, Mancraft. For those expecting the PDiK Gen.1 FL engine, it has been renamed to PDiK Gen.3 SA if you get confused when searching for the PDiK Gen.1 FL. More information below:

"M.A.S.S. Gen.2

M.A.S.S. - Mancraft Air Stock Support - stock for M4.

It can accommodate 13ci (0,21l) HP tank.

Mancraft SDiK For Ashbury ASW338LM


Mancraft announce with pride that a version of their SDiK is now available for the ASG/VFC Ashbury ASW338LM Airsoft Sniper Rifle. The SDiK or the Sniper Drop-In Kit to convert airsoft sniper rifles to be HPA-powered. It is an affordable upgrade and with the Mancraft regulator you cann adjust the muzzle velocity of the rifle.

The Latest News

Feature Story

Airsoft Guns and Gear Reviews