Spartan117gw is going around with the PTS Syndicate EPM Mid-cap magazine and having it tested with various airsoft guns and brands to find out if it is compatible and will be able to feed well. The latest is the PolarStar Airsoft EPAR-15 which has different power source which his HPA, and a different gearbox internals with the Fusion Engine. Did it feed with no hiccupsl? Watch the video below:

More videos from Bingo Airsoftworks on their M2 Browning with the PolarStar Airsoft Fusion Engine installed. Previously, they provided a demo video of the M2 being fired and this time they show the disassembly and assembly of the big gun. One of the best uses of the Fusion Engine is for airsoft support weapons as far as we are concerned.

Bingo Airsoftworks went heavy this time for their custom airsoft project as they took an M2 Browning Machine Gun and installed a PolarStar Fusion Engine... "Here's a video showing the M2 PolarStar Fusion Engine conversion sustained rate test firing. I didn't run out of BBs, I just got tired of holding up the gun! It's shooting 450 fps w/.2g BBs at 80 psi. 23 RPS."

We always believed that the PolarStar Fusion Engine's power can be fully maximised when used in a support weapon. Just watch this Airsoft Extreme Skirmish Report to find out why... "We spent the day at Gamepod Combat Zone after building a Polar Star M249 Kit with a Classic Army MK1 M249...the results...well, check it out yourself!"

Two videos have been posted by Bingo Airsoftworks and VFC HK417 owners interested in the PolarStar Airsoft Fusion Engine might want to watch the first one as it shows the maintenance procedure. The second video is for those who are experiencing feeding problems with the HK417 mid-cap magazine. Visit the Bingo Airsoftworks website for more of their custom services.

Bingo Airsoftworks just has too many projects to count and here's the latest one, turning a finely made airsoft MG42 from SHOEI to be powered by the PolarStar Airsoft Fusion Engine... "The Shoei MG-42 AEG is a relatively rare airsoft gun. It’s a high quality replica of the classic WWII German machine gun. Mike Alexander wanted to take his AEG powered MG-42 to the next level and so he sent it out to have a PolarStar Fusion Engine installed.

Well, you can just put the PolarStar Airsoft Fusion Engine into just about anything including this "Axe" which is the latest project announced by Bingo Airsoftworks in observance of the all-important date --- the 1st of April... "The guitar has been specially modified so it uses the strum bar as the trigger, so you can do extremely fast semi-auto fire by strumming up and down. The whammy bar is used to enable full auto mode.

Something for PolarStar Airsoft Fusion Engine owners to be aware of, especially with the 11.1v Lipo Batteries as explained by Bingo Airsoftworks... "This short video demonstrates the problems you can have running your PolarStar Fusion Engine using an 11.1v lipo battery, with a high rate of fire. The FCU voltage regulator can overheat (the FCU gets hot to the touch) and it causes the solenoids to not trigger properly.

An update on the MP7 PolarStar conversion made by Bingo Airsoftworks. The interesting bit here is the use of 3D printed parts to create some parts for easier conversion... "I’ve made some updates to the original TM MP7 Fusion Engine conversion. Making use of more 3D printed parts allowed the conversion to be simplified and it helps keep all the solenoids in place, so they do not interfere with the sliding stock."

A very nice looking custom sniper rifle gets a Q&A video from HotSpot Airsoft. The base gun is an Ares M110e AEG with its gearbox replaced with the PolarStar Airsoft Fusion Engine to be able to take in the HPA as its power source. They kitted it out further with the KAC QD suppressor which acts as an extended barrel that can produce an extended range needed by an airsoft sniper. Check the full video as it also has some test firing portion.