If you want a rifle that is fully ambidextrous in operation, you will also need to consider a folding stock. With many rifles being ambidextrous nowadays, still having a folding stock that can fold to either side is sorely lacking, and many ARs with folding stocks just fold to one side. With the Strike Dual Folding Adapter from Strike Industries, they can now achieve a high degree of ambidextrous handling.

The Strike Dual Folding Adapter is a M1913 folding adapter system, allowing the shooter to fold the stock to either left or right side to adapt to a comfortable shooting position especially in tight spaces such as vehicles and inside buildings. There is no need to reconfigure, just do the simple steps of pulling up the stock until the hinge allows you to fold it to the side you want and then just push it down to lock it into place. Just do the same operation when folding to either right or left side of the rifle.

It comes as a preassembled as stabilizer and the package includes a separate stock rear piece for rifle or registered Short-Barrel Rifle (SBR). It can be installed with almost any rifle that has 1913 Picatinny rear end in place rather than buffer tube threads seen in ARs. Strike Industries has its own Strike AR Picatinny Stock Adapter that is very much compatible with the Strike Dual Folding Adapter.

You can check the Strike Industries website and other authorized sellers for stock availability. The price is US$219.95 and there is an optional cheek riser that you can purchase with it. If you intend to use it for airsoft, you might need to check first if your airsoft gun is compatible or will require some modding to fit.

More details from Strike Industries below:

The Strike Dual Folding Adapter is the first-in-market patented system that has an intuitive unfolding system for a Picatinny interface. The Strike Dual Folding Adapter folds left or right anytime without flipping or reconfiguring the hinge. At any moment, the user can fold to the desired left or right side. When moved into the folded position, there is a positive lock so the Strike Dual Folding Adapter remains folded. A simple pull up on the bar near the hinge and back for quick deployment when folded.

A 3-degree down tilt angle is added to help prevent interference with the weapons ejection port when folded to the right side. The Strike Dual Folding Adapter mounts directly to a 1913 Picatinny interface with two (x2) built-in locking lugs for a secure attachment. For the stock rear piece, included is a rear rubber anti-slip buttpad to create the best possible shoulder weld for rifle or registered Short-Barrel Rifle (SBR) setups.

A single QD point is located on the rear of the stabilizer and ambidextrous QD sling mounting points for the stock. The Strike Dual Folding Adapter is constructed with a steel hinge and 6061-T6 Aluminum base, adapter & strut. Get a unique modular system with interchangeable (sold separately) parts like optional cheek riser (to be only used legally with stock setup), strut lengths and other accessories.

Use with almost any 1913 Picatinny rear end like the Strike AR Picatinny Stock Adapter or many factory OEM weapons with a Picatinny rail section in place of the traditional AR buffer tube threads. The Strike Dual Folding Adapter is a one of a kind adapter that gives you more options than anything on the market for those who want a truly modular folder that is under 10 ounces.

Product Features:

• Preassembled as stabilizer and includes a separate stock rear piece for rifle or registered Short-Barrel Rifle (SBR)
• Patented first-in-market Picatinny dual folding adapter with intuitive unfolding system
• Folds left or right anytime without flipping or reconfiguring hinge
• Adds [Stabilizer] 9.24" (234.64mm) or [Stock] 9.18” (233.14mm) to overall weapon length
• Adds 1.02” (26.00mm) to overall weapon length in folded position
• Positive lock in the folded position, included rubber pads for folding adapter indentation to adjust desired locking tension when fully deployed
• Pull up on bar near hinge and back for quick deployment when folded
• 3-degree down tilt to help prevent interference with ejection port when folded to right side
• Mounts directly to 1913 Picatinny interface with 2 built-in locking lugs
• Single rear QD [Stabilizer] and ambidextrous QD sling mounting points [Stock]
• Rubber anti-slip buttpad [Stock]
• Steel hinge with 6061-T6 Aluminum base, adapter & strut
• Lightweight at under 10 ounces
• Modular system with interchangeable parts sold separately (strut, cheek riser, stabilizer & more)